48 ports PoE+ switch layer 3 with 4 SFP+ 10 GB
DG-S5310-48GP4X
Key points
- 48 ports PoE switch
- 48 RJ45 Gigabit PoE+ ports
- 4 SFP+ 10G ports
- Redundant power supply
- Dual 370W or 720W power supply
- Switching capacity 176 Gbps
- Manageable L3 - Cloud Management
- Openflow SDN compatible
Top performance 48 Ports PoE+ switch
The Data General DG-S5310-48GP4XS is a high-performance 48-port PoE+ switch featuring 48 gigabit PoE+ RJ45 ports and 4 additional 10G SFP+ ports.
Designed for large-scale installations, this switch is ideal for segmenting networks across wide areas, with numerous PoE-powered devices connected to an aggregation switch via 10 Gbps fiber-optic connections for high-speed data transfer.
The DG-S5310-48GP4XS switch also includes dual redundant power supplies, available in two models based on power needs:
- DG-S5310K-48GP4X-740W: Dual 370W power supplies for a total of 740W power.
- DG-S5310-48GP4X-1440W: Dual 720W power supplies for a total of 1440W power.
- 48-port PoE switch.
- 10G ethernet ports: 4 SFP+ ports.
- Gigabit ethernet ports : 48 1G RJ45 ports.
- 48 PoE+ ports with two available powers:
- DG-S5310-48GP4X-1440W: Dual 720W power supply with 1440W aggregate power.
- DG-S5310-48GP4X-740W: Dual 370W power supply with 740W aggregate power.
- Switching capacity of 176 Gbps.
- Dual redundant power supply replaceable in full operation.
- L3 management via Web or WIS cloud from Data General.
- Rack installation.
| Hardware Specifications | DG-S5310-48GP4X | |
|---|---|---|
| Interface Specifications | ||
| Fixed port | 48 x 10/100/1000 BASE-T ports | |
| 4 x 1G/10G SFP+ ports | ||
| IEEE 802.3af and 802.3at | ||
| Power module | 2 x power modules (1+1 redundancy of power modules) | |
| Management port | ||
| System Specifications | ||
| Switching Capacity | 176 Gbps | |
| Packet Forwarding Rate | 131 Mpps | |
| Number of MAC addresses | 32 | |
| ARP table size | 4k/16k (authorized) | |
| ND table size | 2k/8k (authorized) | |
| Number of IPv4 unicast routes | 8k/12k (authorized) | |
| Number of IPv4 multicast routes | 2.5 | |
| Number of IPv6 unicast routes | 4 | |
| Number of IPv6 multicast routes | 1.2 | |
| Number of ACEs | Ingress: 3,500 | |
| Egress: 1,500 | ||
| Number of IGMP groups | 2.5 | |
| Number of MLD groups | 1 | |
| Number of VSU members | 4 | |
| Dimensions and Weight | ||
| Dimensions (W x D x H) | 442 mm x 420 mm x 43.6 mm (17.40 in. x 16.56 in. x 1.72 in.), 1 RU | |
| Weight | 4.6 kg (10.14 lbs) | |
| CPU and Storage | ||
| CPU | 1.2 GHz dual-core processor | |
| BOOTROM | 16 MB | |
| Flash | 2 GB | |
| SDRAM | 1 GB | |
| Power and Consumption | ||
| Maximum power consumption | < 75 W (non-PoE) | |
| < 1,570 W (PoE full load) | ||
| Maximum output power | DG-PA600I-P-F: 600 W (PoE: 370 W) | |
| DG-PD600I-P-F: 600 W (PoE: 370 W) | ||
| DG-PA1000I-P-F: 176–290 V AC, 1000 W; 90–176 V AC, 930 W (PoE: 740 W) | ||
| Rated input voltage | DG-PA600I-P-F: 200 V AC to 240 V AC | |
| DG-PD600I-P-F: -48 V DC to -60 V DC | ||
| DG-PA1000I-P-F: 200 V AC to 240V AC | ||
| Maximum input voltage | DG-PA600I-P-F: 176 V AC to 264 V AC, 50 Hz to 60 Hz | |
| DG-PD600I-P-F: -38V DC to -75 V DC | ||
| DG-PA1000I-P-F: 176 V AC to 264 V AC, 50 Hz to 60 Hz | ||
| Environment and Reliability | ||
| MTBF | 35.97 years (dual power modules) | |
| 22.06 years (single power module) | ||
| Primary airflow | Left/Front-to-rear airflow | |
| Operating temperature | 0°C to 45°C (32°F to 113°F) | |
| Storage temperature | –40°C to +70°C (–40°F to +158°F) | |
| Operating humidity | 10% to 90% RH (non-condensing) | |
| Storage humidity | 5% to 95% RH (non-condensing) | |
| Operating altitude | 0 m to 5000 m (16404.20 ft.) | |
| Operating noise | < 58.3 dB | |
| Interface suDGe protection | Power port: 6 kV | |
| Telecom port: 10 kV (MGMT port: 4 kV) | ||
| Software Specifications | ||
| DG-S5310-E Series | ||
| Feature | ||
| Ethernet Switching | IEEE 802.1Q (supporting 4K VLANs) | |
| Jumbo frame (maximum length: 9,216 bytes) | ||
| Maximum number of VLANs that can be created: 4,094 | ||
| Voice VLAN | ||
| Super VLAN and private VLAN | ||
| MAC address-based, port-based, protocol-based, and IP subnet-based VLAN assignment | ||
| GVRP | ||
| Basic QinQ and selective QinQ | ||
| STP (IEEE 802.1.d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) | ||
| Auto errdisable recovery | ||
| BPDU filter | ||
| BPDU guard | ||
| Port fast | ||
| Root guard | ||
| ERPS (G.8032) | ||
| LLDP/LLDP-MED, LLDP IPv6, and LLDP-POE | ||
| IP Service | Static and dynamic ARP, ARP proxy, and ARP entry timeout | |
| DHCP client, DHCP relay, DHCP server, and DHCP snooping | ||
| DHCPv6 client, DHCPv6 relay, DHCPv6 server, and DHCPv6 snooping | ||
| DNS client, DNS proxy, and DNSv6 client | ||
| MAC address filtering | ||
| Setting the MAC address aging time | ||
| Neighbor Discovery (ND), ND proxy, and ND snooping | ||
| GRE tunnel | ||
| IP Routing | IPv4 and IPv6 static routing | |
| RIP and RIPng | ||
| OSPFv2, OSPFv3, and GR | ||
| IS-ISv4 and IS-ISv6 | ||
| BGP4 and BGP4+ | ||
| IPv4/IPv6 VRF | ||
| IPv4/IPv6 PBR | ||
| Multicast | IGMPv1/v2/v3 | |
| IGMPv1/v2 snooping | ||
| IGMP fast leave | ||
| PIM-DM, PIM-SM, PIM-SSM, PIM SMv6, and PIM-SSMv6 | ||
| MSDP for inter-domain multicast | ||
| MLDv1/v2 and MLD proxy | ||
| MLDv1/v2 snooping | ||
| PIM-SMv6 | ||
| Multicast source IP address check | ||
| Multicast source port check | ||
| Multicast querier | ||
| ACL and QoS | Standard IP ACLs (hardware ACLs based on IP addresses) | |
| Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port numbers) | ||
| Extended MAC ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type) | ||
| Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range) | ||
| Time based ACLS, ACL 80, and IPv6 ACL | ||
| Global ACLs | ||
| ACL redirection | ||
| Port traffic identification | ||
| Port traffic rate limiting | ||
| 802.1p/DSCP/ToS traffic classification | ||
| Congestion management: SP, WRR, DRR, WFQ, SP+WFQ, SP+WRR, SP+DRR, and SP+WFQ | ||
| Congestion avoidance: tail drop, RED, and WRED | ||
| Eight priority queues per port | ||
| Rate limiting in each queue | ||
| Security | Multiple AAA modes | |
| RADIUS authentication and authorization | ||
| RADIUS and TACACS+ | ||
| IEEE802.1X authentication, MAC address bypass (MAB) authentication, and interface-based and MAC address-based 802.1X authentication | ||
| Web authentication | ||
| Hypertext Transfer Protocol Secure (HTTPS) | ||
| SSHv1 and SSHv2 | ||
| Global IP-MAC binding | ||
| ICMPv6 | ||
| Port security | ||
| IP source guard | ||
| SAVI | ||
| ARP spoofing prevention | ||
| CPP and NFPP | ||
| Multiple attack defense functions | ||
| 3-tuple binding (IP address, MAC address, and port) | ||
| 3-tuple binding (IPv6 address, MAC address, and port) | ||
| Filtering of invalid MAC addresses | ||
| Port- and MAC address-based 802.1x authentication | ||
| MAB authentication | ||
| Portal authentication and Portal 2.0 authentication | ||
| ARP check | ||
| DAI | ||
| ARP packet rate limiting | ||
| Gateway ARP spoofing prevention | ||
| Broadcast storm suppression | ||
| Hierarchical management of administrators and password protection | ||
| BPDU guard | ||
| Port protection | ||
| Reliability | REUP | |
| RLDP | ||
| RLDP, Layer 2 link connectivity detection, and unidirectional link detection | ||
| DLDP | ||
| IPv4 VRRP v2/v3, IPv6 VRRP, and super-VLAN for VRRP | ||
| BFD, RAS, NSR, VRRR, VRRP+, and SDN loop detection | ||
| Basic LACP | ||
| Inter-VSU AP | ||
| Link monitoring, fault notification, and remote loopback based on 802.3ah (EFM) | ||
| Hot swapping of power modules | ||
| Device virtualization | VSU | |
| Local and remote stacking | ||
| Inter-chassis link binding in a stack | ||
| Virtualization through standard service interfaces | ||
| NMS and maintenance | RSPAN and ERSPAN | |
| sFlow | ||
| NTP client, NTP server, NTPv6 client, and NTPv6 server | ||
| SNTP | ||
| CLI (Telnet/Console) | ||
| FTP client, FTP server, FTPv6 client, and FTPv6 server | ||
| TFTP client, TFTP server, TFTPv6 client, and TFTPv6 server | ||
| FTP and TFTP | ||
| SNMP v1/v2/c3 | ||
| Web | ||
| Syslog/Debug | ||
| RMON (1, 2, 3, 9) | ||
| Various types of RMON groups, including event groups, alarm groups, history groups, and statistics groups, as well as private alarm extension groups | ||
| RMON used to implement Ethernet statistics, historical statistics, and alarm functions | ||
| NETCONF | ||
| MACC | ||
| CWMP | ||
| gRPC | ||
| OpenFlow Special 1.3 | ||
| Flow table analysis defined by all protocols | ||
| Transmission of specified packets to the controller | ||
| Configuring the controller’s IP address and port | ||
| Notifying port status changes to the controller | ||
| RNS, configuration rollback, and 802.3ah | ||
| 1:1 mirroring | ||
| N:1 mirroring | ||
| 1:N mirroring | ||
| Flow-based local and remote mirroring | ||
| VXLAN | VXLAN (authorized) | |
| PoE | DG-S5310-24GP4X and DG-S5310-48GP4X: | |
| IEEE 802.3af and 802.3at power supply standards | ||
| Automatic and eneDGy-saving power supply management modes | ||
| Uninterrupted power supply in hot start mode | ||
| Scheduled power-on or power-off of PoE ports based on the time policy | ||
| Port priority |
Datasheets