48 ports gigabit ethernet 4 SFP fanless switch

DG-S1930K-48G4S

Key Points
48-Port Gigabit Silent Switch

The Data General DG-S1930K-48G4S 48-Port Gigabit Ethernet Switch features 48 gigabit RJ45 ports and 4 additional gigabit SFP ports.

Constructed entirely from durable metal and equipped with an efficient passive heat dissipation system, this silent switch is an ideal choice for offices, schools, and industrial environments that require the connection of numerous network devices via cable.

  • 48-port gigabit ethernet switch.
  • Gigabit ethernet ports : 48 ports 1G RJ45, 4 ports 1G SFP.
  • Metal case with passive dissipation system, without fan.
  • Switching capacity: 104 Gbps.
  • L2 manageable switch via Web or WIS cloud from Data General.
  • Rack installation.
Non-PoE ModelDG-S1930K-48G4S
PoE Model
Ports10/100/100048
BASE-T
1000M SFP4
Power over EthernetPoE
PoE/PoE+ Enabled Ports
IEEE 802.3af
(PoE)
IEEE 802.3at
(PoE+)
PoE Power Budget
PhysicalPacket Buffer4.1 Mbits
CPU Memory256 MB
Flash32 MB32 MB
Dimensions440 x 208 x 44 mm
(WxDxH)
Unit Weight≤ 2.8 kg
Power SupplyTypeInternal power supply
Frequency50/60 Hz
AC Voltage100~240 V AC
Power Consumption≤ 40 W
CoolingNon-PoE ModelFanless
PoE Model
CertificationsCertificateVCCI Class A
SurgeCommunication port lightning protection common mode 6kV
Power port lightning protection common mode 4kV, differential mode 2kV
RoHS
EEE(IEEE 802.3az)
Operating Temperature-5ºC to 50ºC
Storage Temperature-40ºC to 70ºC
Operating Humidity10% to 90% RH
Storage Humidity5% to 95% RH
Operating Altitude-50 m to 2,000 m
MTBF> 200,000 hours
Warranty3-Year Warranty Free of Charge
PerformanceSwitching Capacity104 Gbps
Forwarding Rate78 Mpps
ARP Table Size256
MAC Table Size8.192
L2 SwitchingSTP
RSTP
MSTP
Port Grouping(LACP, 8 ports)
VLAN (IEEE 802.1Q/ Private VLAN/ MAC VLAN/ Voice VLAN/ Protocol VLAN / VLAN Mapping)
IGMP Snooping(v1/v2)
Jumbo Frame9,216 Bytes
L3IPv4 RoutingDirect Routing
IPv6 RoutingReleased in the future
Ping (IPv4)
Traceroute (IPv4)
DHCP Client
DHCP RelayReleased in the future
ReliabilityRLDP
SecurityCPP
NFPPReleased in the future
SSH
SSL
IEEE 802.1XReleased in the future
Port Security
ACL
DHCP Snooping (Trusted Port Deployment)
QoSStream Classification (Classification based on IEEE 802.1p/DSCP)
Rate-Limit (Rate-Limit on ingress/egress traffic on interface)
Congestion Avoidance (Tail drop)
Congestion Management (8 queues)
ManagementWeb User Interface
Loop Port Visualization (The detected loop port is displayed on the web)
HTTP/HTTPS
Data General Cloud Management(TR069)
Command Line InterfaceTelnet / Console / SSH
SNMP(v1 / v2c / v3)
SYSLOG
NTP
DNS Client
SPAN
Public MIBs
Private MIBs
Zero Config(Requiring connection with Data General Cloud)
Firmware Upgrade(Upgrade via Data General Cloud / WEB / CLI)
Energy Conservation Law
Model Energy Saving Standard Rate
DG-S1930K-8GT2SFP432%
DG-S1930K-8GT2SFP-P261%
DG-S1930K-18GT2SFP344%
DG-S1930K-18GT2SFP-P310%
DG-S1930K-24GT4SFP/2GT310%
DG-S1930K-24GT4SFP/2GT-P318%
DG-S1930K-48GT4SFP296%
Notes:
    The shell size of DG-S1930K-18GT2SFP-P is 340 × 200 × 43 mm, but because of a protruding heat sink on the left side, the actual size is 348 × 200 × 43 mm.
    MAC VLAN is not supported on aggregation ports. For MAC VLAN, the cos value can’t be changed.
    Voice VLAN is not supported on aggregation ports. For Voice VLAN, cos and DSCP values cannot be changed.
    VLAN Mapping is only supported on the Output direction and only works for 802.1Q tagged packets.
    IP Routing refers to SVI-based static direct routing and default routing.
    Port security is not supported on aggregation ports. For Port Security, dynamic address learning is not supported. The sticky parameter is not supported. Safe address cannot be static or filtered MAC addresses.
    In the QoS module, policy map is not supported.
   Port LEDs are green in all statuses except DG-S1930K-48GT4SFP.

Datasheets